For a replacement sewer hose extension with bayonet fitting you can use the 5-foot Camco RhinoFLEX RV Sewer Hose Extension # CAM39765 or if you need a longer hose their part # CAM39863 which is 10-feet in length. view full answer...
Thank you very much for your question. The Valterra RV Sewer Hose Carrier # A04-5094BK, has the mounting brackets and screws included in the product. We searched the description of this product and no additional mounting brackets are available.
The only replacement part we found for this item is the Replacement Cap and Saddle for Valterra Adjustable Sewer Hose Carrier # A04-0448BK view full answer...
The Flush King Reverse Flush Valve for RV Holding Tanks and Sewer Hoses, # F02-4350 uses bayonet fittings to secure the lug fitting from the hose onto RV's waste valve. These are not replaceable individually. You will need to purchase a new Flush King, # F02-4350. view full answer...
The only replacement gasket we have available for RV sewer hose connectors is with the Camco # CAM39834. This kit includes two bayonet and two elbow gaskets that are designed to fit on Camco elbow and bayonet fittings.
I have attached a short video demonstration on this product so you can get a closer look and see if they will work on your connector. view full answer...
It's highly unlikely that you're going to be able to adapt or repair the damaged hose on your RV sewer maceration system, so you'll want to replace it with # SS25 which is a 25 foot extension and should provide you with plenty of hose length to run from your RV black water tank to the dump station. Different length hoses can be found with part number # 278-SS02 (10ft) or # SS15 (15ft).
In most cases, modifications are not recommended on parts for this reason, so if you can tell me more... view full answer...
The #F02-3105 will not work with the Rhino system. You will need the RhinoFLEX RV Sewer Hose w Swivel Fittings, 4-in-1 Adapter, and Storage Caps - 15' Long # CAM39761 to get that adapter. That adapter is not available separately. view full answer...
All of our sewer hoses are designed to connect to the larger 3" opening since this is the standard.
Normally what you'll see is something like the Dometic Double Waste Valve Setup # TR38A which has the gray tank connecting to the black tank opening, and they are just separated by the different-sized valves.
If you're talking about a 1-1/2" replacement waste valve then we do carry those as well, which you can filter through in the linked selection.
If you are looking for something a little... view full answer...
I took a look at the Waste Master RV Sewer Hose w/ Camlock Fittings, Nozzle, and Endcap # LC360781, which is no longer unavailable from the manufacturer, and I was able to find what I believe to be what you're after:
-Double RV Waste Valves # TR38A.
This wye features a 3" spigot that will slide over your black water line, as well as a 1-1/2" hub that will slide over your gray-water connection.
To complete installation, you'll also need to use some Valterra ABS Solvent Cement # A05-0303... view full answer...
Unfortunately the spring lock ring is not available separately or as a replacement part for the Easy Slip Coupler Fitting # CAM39163. It comes with the unit as well as other units like # CAM39144 and # CAM39173. view full answer...
The following replacement parts are offered for the SewerSolution Macerator System part # SS01:
Replacement Quick Connect Hose Assembly part # SS05
Replacement Jet Nozzle part # 278-SS04
Extension Hose part # 278-SS02
Maintenance Kit part # SS07
Replacement 4-in-1 Elbow Adapter part # SS06 view full answer...
Valterra makes two different replacement caps for their sewer hose carriers. The # A04-0161BK is for carriers manufactured before November of 2019. If your carrier was manufactured after that time (which is likely given the 2021 model year of your Airstream), the correct replacement cap would be part # VA82VR.
I've put together a side by side photo for you, showing the differences between the two. view full answer...
Yes, we carry the Replacement Cap and Strap for Valterra EZ Hose Carrier # VA82VR as it is very common for the cap of the Valterra RV Sewer Hose Carrier # A04-5094BK to be lost or damaged over time. view full answer...
I took a look at the Valtera line of products and the 3 inch replacement valve we carry # CAM39513 can be used as a replacement. If you want to replace the whole assembly and have an input for a regular garden hose for rinsing you can use # CAM39062. view full answer...
I was not able to find a direct replacement lid for your 2020 Keystone Bullet Crossfire. The closest I was able to find to what you're needing is the:
-Multi-Purpose Access Door for RVs - 6-3/4" Diameter # 37231025 for white,
or the,
-Multi-Purpose Access Door for RVs - 6-3/4" Diameter # 37231035 for black.
These access doors measure 6-3/4" diameter, 3/4" deep, and has a hole opening of 5".
Additionally, this access door requires a 5-1/2" diameter x 3/8" deep cutout. view full answer...
Thank you for the pictures of your LaSalle Bristol V93B1, it made it a lot easier to find the correct replacement to get your RV's sewer system back in working order. The V93B1 appears to just be the actual drain pipe with the gray dumping into the black line and doesn't include any valves. You'll need the Valterra RV Sewer Heel Inlet # T1030.
This is going to have the same 2" hub fitting and 3" rotating flange as your V93B1 so you can easily swap it out. You'll need some ABS Cement #... view full answer...
The cap unfortunately is not available for replacement so if you need a new cap for your Valterra Bumper Mounted Carrier for EZ Coupler Sewer Hose Fittings and Adapters # VAL53VJ your options are to either purchase an entire new carrier or create a makeshift cap.
The opening is 5-1/2" wide so theoretically anything with the same diameter would work. view full answer...
We can help you with that. You can use the Bristol RV Waste Valve # 34466N3AR for your 2014 Forest River Wildwood X-lite 235BH. You would then want some LaSalle Bristol ABS Solvent Cement # 3447530889 for installation. view full answer...
The Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Lug # T80 will use the Valterra RV Sewer Spigot with Flange - 1-1/2" # T1005-1 to match the original hub. This secures to your pipe with solvent # A05-0303. The Valterra RV Sewer hub # T1006-1 will also fit but is designed to fit differently than the T80 original connection so it can be a replacement part as well. I've attached a video to help with the dimensions and a couple photos to further assist with dimensions... view full answer...
I have done a bit of research and it sounds like you need the hose that goes from the propane bottle to the regulator. We have 3 different lengths of the MB Sturgis Propane Hose Assembly. We have 12", 15", and 20" lengths.
- MB Sturgis Propane Hose w/ Back Check - RV Type 1 x 1/4" MPT - 12" # 100473-12
- MB Sturgis Propane Hose w/ Back Check - RV Type 1 x 1/4" MPT - 15" # 100473-15-MBS
- MB Sturgis Propane Hose w/ Back Check - RV Type 1 x 1/4" MPT - 20" # 100473-20-MBS view full answer...
The closest match that we have is the Valterra # T1035-2 RV Sewer Elbow. The internal measurement on the spigot end is 3" and is meant for a glued connection rather than a push together connection with an o-ring. view full answer...
Go To Results